HP ProCurve Switch 4000M
With 40 10/100Base-TX ports installed and 5 open module slots

A managed modular 10/100/Gigabit switch that provides scalable, low-cost switching and all the benefits of HP Proactive Networking. It is ideal for organizations looking for scalable, expandable, low-cost migration to 10/100/Gigabit switching to the desktop.

Control
-10/100 autosensing per port: connect any 10Base-T or 100Base-TX device and it works
-RMON and extended RMON: provide advanced monitoring capabilities
-Port monitoring: lets you monitor traffic using a switched port so you can view several ports at one time with an RMON probe
-Web interface: lets you monitor your whole network at once—up to 1,500 segments—from any PC on the network with a web browser
-VLAN tagging: provides multiple VLANs over the same physical link
-VLAN support: provides security between workgroups
-Priority queuing: for Class of Service (CoS) control of applications
-IP multicast (IGMP): prevents flooding of multicast video traffic

Uptime
-Hot swappable modules: allows you to swap modules without interrupting the network
-Optional redundant power supply: provides uninterrupted power
-Redundant fans: provide uninterrupted cooling
-Spanning Tree protocol: prevents network loops
-Lifetime warranty: for as long as you own the product

Performance
-Gigabit uplinks: provide high-speed links to switches, servers, and backbones (with an optional Gigabit module installed)
-Port trunking: for higher switch-to-switch throughput and link-level redundancy
-Half/Full duplex auto-negotiation capability on every port: doubles the throughput to each device

Ports
40 RJ-45 10/100Base-TX ports (IEEE 802.3 Type
10Base-T; 802.3u Type 100Base-TX)
5 open module slots
One RS-232C DB-9 console port

Physical Characteristics
Dimensions: 44.2 x 33.5 x 17.8 cm (17.4 x 13.2 x 7 in)
Weight: 10.4 kg (22.9 lb)

Memory & Processor
Packet buffer size: 512 KB per port (10/100 ports);
2 MB per port (Gigabit ports)
RAM/ROM capacity: 10 MB
Processor type & speed: Intel i960JD @ 66 MHz
Flash capacity: 2 MB

Mounting
Mounts in a standard 19-in rack (hardware included)

Management
HP TopTools for Hubs & Switches included
SNMPv1/v2c
RMON groups: 1 (statistics), 2 (history), 3 (alarm), and 9 (events)
Extended RMON
RFC 1493 Bridge MIB

Accessories
HP ProCurve Switch 10/100Base-T Module (J4111A)
HP ProCurve Switch 100Base-FX Module (J4112A)
HP ProCurve Switch Gigabit-SX Module (J4113A)
HP ProCurve Switch Gigabit-LX Module (J4114A)
HP ProCurve Switch 10Base-FL Module (J4118A)
HP ProCurve Switch 4000M/8000M Redundant Power Supply (J4119A)
A 1000Base-T Module will be available (Gigabit-over-Copper)

Communications
IEEE 802.1p Priority; IEEE 802.1D Spanning Tree;
IEEE 802.1Q VLANs; IEEE 802.3x Flow Control

Safety
EN 60950/IEC 950; UL 1950; CSA 950;
complies with NOM-019-SCFI-1994

Emissions
FCC Class A; EN 55022/CISPR-22 Class A;
VCCI Class A

Immunity
Generic: EN 50082-1
ESD: IEC 801-2; 4 kV CD, 8 kV AD
Radiated: IEC 801-3; 3 V/m
EFT/Burst: IEC 801-4; 1.0 kV (power line),
0.5 kV (signal line)

Performance
Latency: <10μs (LIFO)
Throughput: 4.67 million pps (64-byte packets)
Backplane speed: 3.8 Gbps
Address table size: 10,000 entries

Environment
Operating
– Temperature: 0°C to 55°C (32°F to 131°F)
– Relative humidity: 15 to 95% @ 40°C (104°F), noncondensing

Non-operating/storage
– Temperature: -40°C to 70°C (-40°F to 158°F)
– Relative humidity: 90% @ 65°C (149°F), noncondensing

Shock & Vibration: EN 60068 (IEC 68)

Electrical Characteristics
Heat dissipation/hour: 535 BTU/hr
Maximum wattage: 157W
Auto Voltage: 100–127 VAC/200–240 VAC
Current: 2.0A max/1.0A max
Frequency: 50/60 Hz