MaxSwitch IIm

Modular Construction for Easy Maintenance and Flexibility.
MaxSwitch II is a combination of 4 slot host cabinet and 6 kinds of media modules. A maximum 32 x 10/100Base-TX switched ports can be achieved using 4 x 8 port 10/100Base-TX switch modules. In the same way a maximum of 4 x 1000Base-SX or 16 x 100Base-FX ports can be accommodated in the host cabinet. Any of the above modules can be integrated to give up to 24 different combinations.

Scaleable Modules ease Migration Towards Gigabit and Fast Ethernet
A module family consisting of either 8 x 10/100Base-TX ports; 1 x 1000Base-SX port; 2 x 100Base-FX port; 4 x 100Base-FX ports, allows the user to choose modules which optimize network performance whilst reducing cost and complexity. By providing 4 G-Link bus interfaces in the base unit, the user has the freedom to arrange any module in any slot giving the ultimate in flexibility. The integration of 10/100Mbps and 1000Mbps technology is now a simple matter of slotting in the desired module. By mixing different modules in the same cabinet, the user ensures network performance and budget requirements are easily met.

Gigabit Module Supports Full 1000Mbps Connections
The future of networking technology is here today! Install our Gigabit Module and say goodbye to data bottlenecks. The Gigabit Module catapults your 10 and 100Mbps signals to a full 1000Mbps for unparalleled uplink data capacity.

100Base-FX switch module extends the network distance up to 2KM
The 100Base-FX(SC/ST) switch module extends the distance between 2 switched hub or switched hub to fileserver/workstation to 2KM if in full-duplex mode.

Intelligent SNMP internal modules are supported
The optional SNMP module is good for in-band and out-of-band SNMP management.

High Entry-MAC address and 9.6Gbps backplane improve Network performance
MaxSwitch II features store-and-forward switching scheme. Every module has its own 12K entry MAC address table to store source address. The backplane of the MaxSwitch II can reach up to 9.6Gbps as to improving network performance.

Features
- Conforms to the IEEE 802.3, 802.3u, 802.3z & 802.3x standards
- Store-and-Forward technology is used
- Transparent to all higher level protocols such as IPX, IP, XNS, AppleTalk, Vines, DECnet, ARP, DECLAT
- Plug-and-Play, self-learns network configuration
- Supports both half and full-duplex modes
- Ethernet ID table: 12K entry MAC address table per module
- Web-base management support
- Console and telnet management support
- Port management support to enable and disable ports and to set other port parameters.
- IEEE802.1d Spanning Tree Protocol support
- IEEE802.1q Virtual LAN support up to 32 Group
- Port Aggregate support (Trunking Port can up to 800Mbps cascade)
- Static Address Table for manual address addition support
- TFTP easy firmware upgrade support
- MIB II and Private MIB support
- RMON 4 Group support

Modules

2 Ports 100Base-FX Fiber module

8 Ports 10/100Base-TX module